Loading Events

« All Events

  • This event has passed.

Annual Machinery Consignment Auction

April 5

 

Description:

April 05, 2025 at 10:00am

Auction Starts at 10 AM, be prepared as we will possibly be running multiple rings throughout the day!   Something for everyone!

Combines:

7700 John Deere combine, 3,582 hours, comes with 24 ft. header

1660 CaseIH combine, 3,000 hrs, recently went through dealership, many new parts installed, only 300 hrs on new engine, comes with header

Tractors:

2090 Case tractor w/GB 860 loader, grapple, new ac, recent trans work, excellent rubber, nice unit, 5,917 hrs, joystick, 3 pt., PTO

1994 Agco Allis 5670, SN 002025, 554 hours, 24 speed transmission, 4 cyl. diesel Eng., 3 pt., 540/1000 PTO, 3 remotes, quick attach, 16.9R30 rears, joystick for loader, loader, 6′ tooth bucket, nice older unit

1175 Case tractor, 9,675 hrs, good rubber, like new Koyker 510 loader, PTO, needs cab kit, runs and drives great

8N Ford tractor, loader, excellent rubber, 3 pt., PTO

Trailers:

shop made 6’X17′ tandem axle snow mobile flat trailer, aluminum deck, steel frame, NICE unit

Triple axle gooseneck flatbed trailer, 7’X24′, dove tail, no title, trailer house axles

1999 Titan gooseneck stock trailer, 7’X20′, VIN 4TGG20207X1012304, excellent condition!

1974 Shelby bumper pull stock trailer, VIN 1854, excellent condition

Campers:

1995 Bluebird RV, 8.3 Cummins, Allison transmission, new Goodyear rubber all the way around, Slide out 4 Cyl. Diesel generator in front of coach, everything works as it should

2005 Gulfstream Innsbruck Merrillite 24RL, sleeps 6, good awning, 10 ply tires, back rack, nice unit

Vehicles:

2018 GMC Canyon SLE, this pickup has been SOLD !! this will NOT be at the AUCTION !!

1984 ¾ Ton Chevrolet, long bed, 2 wheel drive, turns over and starts when gas is poured down, clutch issues

1985 Ford service pickup, manual transmission, working tommy lift, air compressor, (water tank in pic NOT included), clear title

2001 Ford F250, 200,000 miles, new engine at 189,000 miles, new starter, alternator and batteries in early 2024, clear title

1999 Ford F-250 Super Duty extended cab Pickup, 168,800 miles, 8 ft. box, new tires

1973 Ford F600 farm truck, 31,000 miles,

1990 Ford Mustang fox body, runs, car is setup for racing, car will come with Certificate of Compliance and a Bill of Sale

1998 Ford van/party bus, 110,000 miles, V10, has exhaust leak, title

2004 GMC 2500 HD, 175,173 miles, 4X4, fifth wheel, remote start, AC/Heat, power windows, locks and seats, Extended cab, cloth interior, title

1975 CJ5, good project vehicle, title

Machinery:

Great Plains Sprayer, 1,000 gal tank, 60’ Booms, rebuilt hyd pump, 30” nozzles, Monitor

6′ King Kutter rotary mower, 540 pto

6′ Bison back blade, like new

3 point, 3 bottom plow

5′ King Kutter box blade, 3 point

6′ King Kutter, 3 point disc

Crustbuster big box hoe drill, 32′, 10″ spacing, new points and other parts last year, comes with numerous new parts, always shedded when not in use, very nice drill

A & L grain cart, 425 bushel, PTO, good tires

New Holland model 56 side delivery rake

8300 John Deere disc drill, 8″ spacing, 14′, excellent condition, always shedded

Crustbuster springtooth, manual fold, spike harrows

fuel tank on trailer

717 John Deere rotary mower

John Deere post hole auger

HD 3 pt. bale forks

Eversman ditcher

track closer

3 point Hardi sprayer

Crustbuster hoe drill, red box

3X5 undercutter

H & S dual 6 wheel hay rake

John Deere 1600A hydra swing swather

1230 Sunflower disk

numerous rotary mowers

Case 6 bottom plow

numerous back blades

John Deere 220 disc

Friesen seed tender, 240, gas motor, conveyer,

3 pt. landscape rake

John Deere 8300 drill, 10″ spacing, 12′

Livestock Items:

stock tanks

Portable loading chute

2-6′ X 24′ feeders

500 +/- T posts

150 +/- electric fence posts w/insulators

Cake box feeder

13-5 bar continuous panels

calf chute

wire roller

Powder River calf cradle

sheep/calf alley way

heavy duty feed bunks

Livestock silage feeder wagon, like new, liners, 7’X20′

NEW 12’X24′ cattle shed on skids

NEW 5’X24′ free standing cattle panels

NEW 8’X26′ cattle panels

NEW H Posts, 9’X11′

NEW 90 corner posts, 10’X8′

NEW 10′ cattle guard

NEW 15′ cattle guard

NEW 20′ cattle guard

Collectibles:

Schlitz beer sign

Sled

Cultivator

Pipe vises

Anvil

Pull type dump rake

Wisconsin engines

Shop Related Items:

Fiberglass ladders

Transmission jack

Floor jacks

NAPA shop stool

Radial arm saw

Schauer battery charger

Creeper

Hand dolly/truck

Wheelbarrow

Shop vacs

Air compressors

Trash cans

Air bubble

Numerous hand tools

Power tools, corded and battery operated

12’ X 10’ rollup garage door

12 volt Dayton winch

Portable air compressor, Honda gas Eng.

Pickup toolboxes

(2) Tool Boxes on Stand

Generator

Work Benches

Shelves

Air Conditioner

Cement mixer

portable air compressor, 5 HP Eng.

16 HP generator, 4000 watt

wrenches, screwdrivers, pliers and more

bench grinders on stands

Makita chop saws

extension cords

Cable cutters

pipe vise

polishers

band saw

press

welding helmets

Airco torch set

hinges, hardware, screws and more

saw blades, saws

miter saws

brake

saw horses

drill press

anvil

punches, chisels, hammers, vise grips

Milwaukee tools

electrical supplies

twine

like new electric motors

take off planter parts

Many trailers have been loaded for the auction, come see what great items have been loaded !!

Lawn and Garden:

Honda HRX217 self-propelled lawn mower

Protill rear tine tiller, 8 hp Briggs Eng., 4 speed transmission w/reverse

Land Pride Razor zero turn mower, 20 hp Honda, 52” cut

Push mowers

Chain saws

Edgers and weed eaters

Shovels, rakes, hoes, brooms

4’X7’ folding aluminum ramps

Snapper 160 Zero Turn Mower, 42” (cuts and mows)

Craftsman 4 Stroke Weedeater

Homelite Leaf Blower, 2 Stroke

Garden Trailer

lawn tractor snow plow

Land Pride Razor Z mower, 20 HP Honda Eng., 54″ cut, 300 hours

John Deere D125 riding mower, 42″ deck

gas powered post hole auger

Country Clipper zero turn mower

Kubota zero turn mower

Z-Max zero turn mower, 60″ deck

Recreational Items:

Bicycles

Coolers

Life Jackets

1977 16’ Charger Boat w/trailer, 85 hp motor and trolling motor

Baretta boat, 200/V8 Alpha One Mer Cruiser motor, cover, w/trailer

Water Skies

Fishing Poles

1999 John Deere 4X2 Gator, manual dump, 2,740 hrs on machine, 806 hrs on replacement engine, 11 hrs since last service

2000 John Deere Gator, 1,568 hrs, electric dump, 16 hrs since last service

fishing poles, tackle boxes

Kawasaki 4X4

Polaris Sportsman 500 4X4

NEW Travel Q BBQ grill

NEW Napoleon Rogue BBQ grill

Sport Angler Pontoon boat w/trailer

2023 Yamaha Wolverine side by side, regular service, 8,000 miles, excellent unit, 4 seater

2023 Yamaha Wolverine side by side, regular service, 7,000 miles, excellent unit, 2 seater

Misc. Items:

750 gallon propane tank, 25% full, wet leg

8’ dozer blade

275 60R20 tires/rims, came off 2021 Chevy 2500, w/wheel spacers

Weather tech floor mats

1000 watt generator, 2 cycle

Airco welder/generator, Onan Eng., motor is weak

1,000 Gal. Tank on Skids

1,000 Gal. tank on 4-wheel trailer w/transfer pump

Ford F150 00-03 grill guard w/brackets

4-16 inch Chevy wheels

235/85R16 tires w/16 inch Ford steel wheels

4-Goodyear 255/65R17 tires, like new

4-Michelin 265/65R17 tires

New, 710/70R38 tractor tire

Wheatheart sweep/truck transfer auger

Skid Steer/Attachments:

60” skid steer tooth bucket

2-Heavy Duty Do-All Receiver Hitch Skid Steer Plates with Chain Buckets, Pin Holders/Hook Holders, Universal Receiver Hitch.

2-Heavy Duty ½ Moon gusseted Skid Steer Receiver Hitch with Chain Hook Holders. Locations for extra hitches and pins on moon. Universal Receiver Hitch.

2-Heavy Duty Gooseneck & Universal Skid Steer Receiver Hitch with Chain Hook Holders.

4-Solid Full Weldable Quick Attach Blank Plates. No need to grind off paint, can weld right away to anything and turn into a skid steer attachment.

6-Open Center Viewpoint Weldable Quick Attach Blank Plates. No need to grind off paint, can weld right away to anything and turn into a skid steer attachment.

 

ACCEPTING ITEMS UNTIL APRIL 3rd, 2025.

Commission Charges for Machinery Consignment Auction

Conducted by:

Schneider Auction Service & Dellett Auction Service

Schoenchen, KS ,Lacrosse, KS

$1.00 to $300.00 = 30%

$301.00 to $1,000.00 = 18%

$1,001.00 to $5,000.00 =10%

$5,001.00 to $20,000.00 =5%

$20,001.00 to $40,000.00 =4%

$40,001.00 and above = 3%

 

Commission is charged per item unless other arrangements have been made with Auction Companies.

Title service fee: $15.00 per title/bill of sale

All consignors are responsible to make arrangements to protect their minimum bids.

Fee for items not sold at the auction will be $50.00 per item.

Items consigned before March 10th, 2025 will get free advertising listed on sale bills, auctioneers websites, and more. Last day to consign items will be April 3rd, 2025 Consignors must deliver items the week of the auction no later than April 3rd, 2025.

Questions or comments contact:

Jason Schneider-Schneider Auction Service @ 785-650-2433

John Kisner Schneider Auction Service @ 785-656-3044

JasonDellett-DellettAuction Service @ 785-650-4986

Details

Venue

  • Rush County Fairgrounds
  • Rush County Fairgrounds
    LaCrosse, KS 67548 United States
    + Google Map